About Vice Hand Tool
by
Kuldeep singh
The Blog below is as important as Knowledge. Everything you need to know about carpenter hand tools or other industrial tools for your welfare:
A typical hand vice has a handle attached to a set of jaws which can clamp down on various items. The jaws can be tightened with the assistance of wing screws, and they typically have a spring catch which keeps them open to the width they are set at. The jaws are also typically textured to increase their traction, ensuring that items in the hand vice do not slip.
There are a number of uses for these tools, ranging from woodworking to jewelling, and many crafters have a hand vice or two available for projects. A typical Industrial hand vice has a handle attached to a set of jaws which can clamp down on various items. A small hand vice is a tool used to hold objects securely while they are worked on. A vice can be used to hold large and heavy objects as its jaws have a grip that can exert considerable pressure.
For holding work pieces on the tables of machine tools, vices with smooth hardened-steel jaws and flat bases are used. These machine vices are portable but may be clamped to the machine table when in use; means may also be provided for swiveling the active part of the vice so that the work piece can be held in a variety of positions relative to the base. For holding parts that cannot be clamped with flat jaws, special jaws can be provided.
A vice, sometimes called the Second hand, is an indispensable tool in the tool room or workshop. Vices are usually mounted on workbenches or similar firm supports to hold material in place.
Most vices can be used for a wide variety of work because they are stainless steel and cheap hand tool. Select the most suitable vice which is strong enough for the work.
Things to keep in mind before work or buying hand tool with any Accessories of hand Tool:
Important do’s for the Hand Tools:
Wear safety glasses or goggles, or a face shield (with safety glasses or goggles) when using striking tools or power tools on a work piece held by a vice.
Attach a vice securely. Place bolts in all the holes in the base of the vice. Use lock washers under the nuts.
Mount a vice so that the stationary jaw projects slightly beyond the edge of the workbench. This allows long work to be clamped in the vice without interference from the edge of the workbench.
Check the vice for cracks or other damage before clamping a work piece in it.
Use a vice or buy any hand tool it must be large enough to hold the work without strain.
Place the work piece in the vice so that the full clamping surface of the jaw supports the work piece
Keep the work piece in the vice close as possible to the jaws to prevent vibration when sawing, filing, etc.
Support the end of extra-long work with an adjustable stand, saw horse, or box rather than putting extra strain on the vice.
Keep all threaded and moving parts clean, oiled and free of chips and dirt.
Use jaw liners in a vice where there is any possibility of marking the work.
Replace a bent handle and worn jaw inserts.
Some don’ts that need to know:
Do not weld the base of the vice or precious hand tool to any metal.
Do not repair a vice by welding or brazing.
Do not try to bend a heavy rod in a light vice.
Do not cut into the jaws.
Do not apply heavy pressure at the corner of the vice jaws.
Do not use a handle extension (e.g., a pipe) for extra clamping pressure.
Do not hammer on the handle to tighten beyond hand pressure.
Do not use the jaws of the vice as an anvil.
Do not use any vice or other industrial tool that has the slightest crack.
Do not unscrew or open the jaws of the vice wider than they were designed to be used.
Uses of vice
A vice is a tool used to hold objects securely while they are worked on. A vice can be used to hold large and heavy objects as its jaws have a grip that can exert considerable pressure.
Metalworking In addition to woodworking, bench vices also have many uses in metalworking as well. Bench vices can be used to hold metal in place to be cut or modified.
Wood working
Similarly to metalworking, a vice is a useful tool when woodworking as it holds the wood sturdy while work is being completed.
Adjusting A vice or quality hand tools can also be a useful tool when trying to tighten or loosen a stiff object, such as a screw and nut. The vice can hold the screw sturdy while a wrench is used to adjust the nut.
More visit:- www.tradusway.com
A vice is a tool used to hold objects securely while they are worked on. A vice can be used to hold large and heavy objects as its jaws have a grip that can exert considerable pressure.
Metalworking In addition to woodworking, bench vices also have many uses in metalworking as well. Bench vices can be used to hold metal in place to be cut or modified.Wood workingSimilarly to metalworking, a vice is a useful tool when woodworking as it holds the wood sturdy while work is being completed.Adjusting A vice or quality hand tools can also be a useful tool when trying to tighten or loosen a stiff object, such as a screw and nut. The vice can hold the screw sturdy while a wrench is used to adjust the nut.
Article Source:
eArticlesOnline.com
}